Mỏ cắt plasma PSB Mỏ cắt plasma PSB Plasma cutting torch PSB 31 – the sturdy and reliable classical tool for manual cutting applications with safety switch. Depending on the equipment parts fitted and the respective cable assembly, the PSB 31 can be used with: PSB Mỏ cắt Plasma Số lượng: 0 cái

  •  

  • Mỏ cắt plasma PSB

  • Plasma cutting torch PSB 31 – the sturdy and reliable classical tool for manual cutting applications with safety switch. Depending on the equipment parts fitted and the respective cable assembly, the PSB 31 can be used with:

Thương hiệu
Vật liệu
Xuất xứ
 

Plasma Cutting Torches PSB

Plasma Cutting Torches PSB

Plasma cutting torch PSB 31 – the sturdy and reliable classical tool for manual cutting applications with safety switch. Depending on the equipment parts fitted and the respective cable assembly, the PSB 31 can be used with:

  • Single flow systems, designed for ignition by contact (KZS)
  • Single flow systems, designed for short-circuit ignition (KKS)
  • Single flow systems, designed for non-contact ignition (HFS)

PSB 60 single flow and PSB 121 dual flow – sturdy and reliable, proven for years and still relevant:

  • for manual cutting applications, with safety cut off
  • for tools with high-voltage arc-start

Plasma Cutting Torches PSB, air cooled

Technical data (EN 60 974-7):

Type: PSB 31
KZS / HFS / KKS		 PSB 60 S
 		 PSB 121 S
AUT PSB 121 L
Type of cooling: air cooled air cooled air cooled
Pilot current: 10 - 15 A
(max. 18 A)		 15 - 22 A
(max. 25 A)		 15 - 22 A
(max. 25 A)
Rating: 30 A (at 60 % DC) 60 A (at 35 % DC) 100 A (at 35 % DC)
Type of gas: Compressed air Compressed air Compressed air
Gas flow: approx. 130 l/min. approx. 150 l/min. approx. 150 l/min.
Working pressure: 3.5 - 4.5 bar 5 - 6 bar 3.5 - 4.5 bar (Plasma gas)
5.5 - 7.0 bar (Cooling gas)
Air value defined with
nozzle size:		 1.0 mm 1.3 mm 1.5 mm
− Plasma air: approx. 12.5 l/min. approx. 18.5 l/min. approx. 18 l/min.
− Soft start air: − ≥ 12 l/min. ≥ 12 l/min.
Gas post flow: ≥ 15 sec. ≥ 60 sec. ≥ 60 sec.
Type of ignition: Contact / HF HF HF
Gas supply: Compressed air both for plasma and cooling gas Compressed air both for plasma and cooling gas −
Ignition voltage: 7 kV (HF) 7 kV (HF) 7 kV (HF)
Cutting thickness: max. 10 mm
at 30 A
depending on material to be cut and power source		 max. 20 mm
at 60 A
depending on material to be cut and power source		 max. 40 mm
at 100 A
depending on material to be cut and power source

 

  Ý kiến bạn đọc

     

 Mỏ cắt Plasma
2.60 MB
 Từ khóa: Binzel, mỏ hàn MAG, Mỏ hàn TIG, mỏ cắt plasma, hàn plasma, phụ kiện hàn CO2, contactip, đại lý binzel, phân phối Binzel, Binzel giá rẻ, Binzel chính hãng
Sản phẩm cùng loại
 
Danh mục sản phẩm
Hỗ trợ trực tuyến
  • Đình Tỉnh

    Tư vấn - Mr Cường

    Call: 0916 765 646

    nguyencuong@tc-tech.com.vn

    skype cuong.tctech
    zalo min 0916.765.646
     

  • Đình Tỉnh

    Tư vấn - Mr.Thắng

    Call: 0945.663.666

    Ducthang@tc-tech.com.vn

    skype thang.tctech
    zalo min     0945.663.666

  • Đình Tỉnh

    Tư vấn - Mr Ngọc

    Call: 0965.228.665

    Daongoc@tc-tech.com.vn
    skype
    zalo min0965.228.665

     

Đối tác
SMK
Klingspor
Binzel
UTools
 yamawa
Togami
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây