Robot-Navi-Single Robot-Navi-Single Hãng sản xuất: SMK
Xuất xứ: Nhật Bản
Bảo hành: 1 năm
Robot-Navi-Single Navi Nut system Số lượng: 0 cái

  • Robot-Navi-Single

  • Hãng sản xuất: SMK
    Xuất xứ: Nhật Bản
    Bảo hành: 1 năm

Thương hiệu
Xuất xứ

For robots and automated machinery

Suitable for fully automated welding system which uses controlling function and robot for workpiece setting, nut feeding, product-type switchover, changing weld conditions, etc. .

Robo-navi-Single Controller


Suitable for any type of nut: square, hex, ring, pilot, seal nut, etc.
Large displays are easy to read at a distance
Different reference point and data can be set for each channel.
Reference point setting. All you have to do is to press a key.
+Tolerance /-tolerance, or upper limit/lower limit, can be set between -9.99 and +9.99 in increments of 0.01 mm for each reference point.
Monitor function displays every start-up channel, +/-tolerance, and reference point,  and error codes.
Every judgment result (distance from the reference point) is indicated in increments of 0.01 mm.
Current guide pin height is indicated in increments of 0.01 mm in the DATA mode.
Judge timer can be set between 0 and 999 cycles in increments of 1 cycle.
Overlapped nuts detecting function (To connect sensor to terminal block directly, commercial sensor
Input/output terminals for communicating signals between the robot and this product are equipped


Handy-navi Unit


handy 01 20181123125436182

Reduces production time to 1/2!!

Vertical movement of the guide pin enables high-speed movement of the workpiece, and reduces production time.

No friction!!

Adoption of high-powered cylinder has reduced friction between the workpiece and theguide pin, and it raises operation rate.

Holder shows excellent cooling effect!!

Inner water-cooling system directly cools inside the holder. It reduces wear and tear from the heat from electrodes and spatter adhesion.

Quick guide pin replacement!!

Traveling the whole length of the cylinder, the guide pin is sent from inside the holder. This enables quick guide pin replacements.

Space saving!!

Slim and compact body without water jackets or intermediate adapters allows minimum interference with your workpiece and jig.

Positioning is much easier!!

You don't have to bother with adjustment and positioning at every replacement of electrodes and other parts.

Air blow system!!

Air blow system reduces spatter adhesion to nuts, guide pin, and inside the unit Air-cooling effect reduces the heat of electrodes.

Low cost & short lead time!!

We have the Slide Unit body and related parts in the standard items to enable low prices and quick delivery.

Ø25 ( M4-M5-M6-M8)

Model Loại ốc L Chiều dài SL tối thiểu
RN2-SHP-25150-M4 M4 140 448 1
RN2-SHP-25150-M5 M5 140 448 1
RN2-SHP-25150-M6 M6 140 448 1
RN2-SHP-25150-M8 M8 140 448 1
RN2-SHP-25200-M4 M4 190 498 1
RN2-SHP-25200-M5 M5 190 498 1
RN2-SHP-25200-M6 M6 190 498 1
RN2-SHP-25200-M8 M8 190 498 1
RN2-SHP-25250-M4 M4 240 548 1
RN2-SHP-25250-M5 M5 240 548 1
RN2-SHP-25250-M6 M6 240 548 1
RN2-SHP-25250-M8 M8 240 548 1

Ø32 ( M10-M12-M7/16)

Model Loại ốc L Chiều dài SL tối thiểu
RN2-SHP-32150-M10 M10 140 448 1
RN2-SHP-32150-M12 M12 140 448 1
RN2-SHP-32150-M7/16 7/16 140 448 1
RN2-SHP-32200-M10 M10 190 498 1
RN2-SHP-32200-M12 M12 190 498 1
RN2-SHP-32200-M7/16 7/16 190 498 1
RN2-SHP-32250-M10 M10 240 548 1
RN2-SHP-32250-M12 M12 240 548 1
RN2-SHP-32250-M7/16 7/16 240 548 1


  Ý kiến bạn đọc



 Từ khóa: sản xuất
Danh mục sản phẩm
Hỗ trợ trực tuyến
  • Đình Tỉnh

    Tư vấn - Mr Cường

    Call: 0916 765 646

    skype cuong.tctech
    zalo min 0916.765.646


  • Đình Tỉnh

    Tư vấn - Mr.Thắng

    Call: 0945.663.666

    skype thang.tctech
    zalo min

  • Đình Tỉnh

    Tư vấn - Mr Ngọc

    Call: 0965.228.665
    zalo min0965.228.665


Đối tác
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây